| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.51 |
| Score | 0% | 70% |
The primary difference between a claw and a ball-peen hammer is which of the following?
their striking end |
|
their handle shape |
|
their non-striking end |
|
their size |
The most common striking tool is the hammer and the most common variety of hammer is the claw hammer. The claw hammer has two ends, one to drive nails and one to remove nails. Ball-peen hammers replace the claw with a rounded end that's used to round off the edges of metal pins and make gaskets.
Which of these saws is used with a miter box?
back saw |
|
crosscut saw |
|
rip saw |
|
hacksaw |
A miter box utlizes a back saw (a fine toothed saw with a rigid strip of steel opposite its blade edge) to make cuts in wood at a specified angle.
A welding rod provides:
protection for the welder |
|
fuel for the welding torch |
|
the joining material for a weld |
|
stability for the welding torch |
The joining material for a weld is called a welding or filler rod and is available in a variety of diameters and alloys for different welding tasks.
Inside and outside micrometers measure inside and outside:
tolerances |
|
diameters |
|
angles |
|
lengths |
Micrometers measure the diameter of cylindrical objects. Outside micrometers measure the external diameter of cylinders and inside micrometers measure the internal diameter of the cylinder's hole.
Screwdrivers are most broadly classified by their:
length |
|
torque |
|
tip |
|
width |
Screwdrivers come in many different handle, shaft, and tip configurations for use in a wide variety of applications. Screwdrivers are classified by their tip which is shaped to fit a corresponding screw head. Common tips are slotted (flat) and Phillips (x-shaped).