ASVAB Automotive Information Practice Test 142196 Results

Your Results Global Average
Questions 5 5
Correct 0 3.68
Score 0% 74%

Review

1

Which of the following cylinder arrangement would be most common in an eight cylinder engine?

80% Answer Correctly

inline

opposed

vertical

V-type


Solution

Cylinder number and arrangement depends on the purpose of the engine. Smaller (four and six cylinder) engines in front-wheel drive vehicles often use an inline design which orients cylinders vertically over the crankshaft and aligns them in a row. Other common orientations are a horizontal/opposed design which places cylinders flat facing each other with the crankshaft between them and a V-type design common in six and eight cylinder engines that features one cylinder head per block of cylinders oriented at a 60 to 90 degree angle to each other with the crankshaft at the bottom of the V.


2

What does the timing belt do?

64% Answer Correctly

synchronizes the cam and the camshaft

calibrates the speedometer

synchronizes each piston to the crankshaft

synchronizes the camshaft and the crankshaft


Solution

Maintaining proper synchronization between the rotation of the camshaft and the rotation of the crankshaft is critical to ensure that the engine's valves open and close at the proper times during each cylinder's intake and exhaust strokes.


3

The two major types of vehicle braking systems are:

78% Answer Correctly

drum and disc

hydraulic and shoe

drum and shoe

disc and shoe


Solution

Brakes utlize friction to slow vehicle tires. Drum brakes employ a cast iron drum that roates with the vehicle axle. When hydraulic pressure is applied to the brake assemblies at the wheels, internal pistons expand and push brake shoes outward into contact with the brake drum slowing the rotation of the axle. More powerful disc brakes operate by pinching a rotating disc betweeen two brake pads and allow for a larger surface area to contact the disc, provide more force, and are more easily cooled.


4

When a car engine is running, what provides electrical current to recharge the battery and power the electrical system?

84% Answer Correctly

camshaft

battery

alternator

solenoid


Solution

Once the engine is running, the alternator provides electrical current to recharge the battery and power the electrical system. The alternator is driven by the engine's crankshaft and produces alternating current (AC) which is then fed through a rectifier bridge to convert it to the direct current (DC) required by the electrical system. A voltage regulator controls the output of the alternator to maintain a consistent voltage (approx. 14.5 volts) in the electrical system regardless of load.


5

The ignition coil is a(n):

63% Answer Correctly

amplifier

step-up transformer

filter

step-down transformer


Solution

The ignition coil steps up the 12 volts available from the battery or alternator to a voltage of 30,000 or more volts at the spark plug. Converting a lower voltage input into a higher voltage output makes the ignition coil a step-up transformer.