ASVAB Automotive Information Practice Test 176937 Results

Your Results Global Average
Questions 5 5
Correct 0 3.43
Score 0% 69%

Review

1

The intake ports on the cylinder heads is fed outside air via the:

66% Answer Correctly

intake control module

intake air pump

intake pressure regulator

intake manifold


Solution

The intake manifold distributes outside air to the intake ports on the cylinder heads. The intake air filter removes any airborne contaminants before the air enters the engine.


2

The two major types of vehicle braking systems are:

77% Answer Correctly

drum and disc

hydraulic and shoe

disc and shoe

drum and shoe


Solution

Brakes utlize friction to slow vehicle tires. Drum brakes employ a cast iron drum that roates with the vehicle axle. When hydraulic pressure is applied to the brake assemblies at the wheels, internal pistons expand and push brake shoes outward into contact with the brake drum slowing the rotation of the axle. More powerful disc brakes operate by pinching a rotating disc betweeen two brake pads and allow for a larger surface area to contact the disc, provide more force, and are more easily cooled.


3

The fluid reservoir stores the __________ that the master cylinder uses to maintain hydraulic pressure.

79% Answer Correctly

brake oil

air

ethylene glycol

brake fluid


Solution

The fluid reservoir stores the brake fluid that the master cylinder uses to maintain hydraulic pressure.


4

Which of the following enables heat transfer from the cylinder heads to the coolant?

49% Answer Correctly

water sleeve

radiator

water pump

water jacket


Solution

A water jacket is a coolant-filled casing that allows heat transfer from the engine block and cylinder heads to the liquid coolant.


5

Both intake and exhaust valves are closed as the piston begins moving back up from the bottom of the cylinder, compressing the air-fuel mixture in the combustion chamber which also makes it hotter. This describes which engine stroke?

73% Answer Correctly

intake

power

compression

exhaust


Solution

During the compression stroke, both intake and exhaust valves are closed as the piston begins moving back up from the bottom of the cylinder (bottom dead center or BDC). This compresses the air-fuel mixture in the combustion chamber which also makes it hotter.