| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.07 |
| Score | 0% | 61% |
Power brakes multiply the force a driver applies to the brake pedal using a __________ connected to the engine intake manifold.
speed sensor |
|
cylinder |
|
brake line |
|
vacuum booster |
Power brakes multiply the force a driver applies to the brake pedal using a vacuum booster connected to the engine intake manifold. This provides for much higher hydraulic pressure in the braking system than could be generated by the driver alone. Antilock brakes (ABS) use speed sensors and adjust the brake pressure at each wheel to prevent skidding and allow the driver more steering control in slippery conditions.
Piston rings are responsible for which of the following?
connecting the piston to the camshaft |
|
regulating oil distribution inside the cylinder |
|
connecting the piston to the spark plug |
|
containing combustion |
Cylinders act as a guide for the pistons that translate the heat energy of combustion into the mechanical energy necessary to move a vehicle. Piston rings seal the piston to the cylinder to contain combustion gases and also regulate the oil distribution between the piston and cylinder wall. A cylinder head closes in the top of the cylinder forming the combustion chamber which is sealed by a head gasket (head). The head provides space for air and fuel intake valves, exhaust valves, and mounts for spark plugs and fuel injectors.
A vehicle's lighting system is protected from current spikes by:
fuses and circuit breakers |
|
the voltage regulator |
|
the alternator |
|
the battery |
The lighting system consists of interior lights, instrument panel lighting, headlights, and taillights. Like household electrical circuits, the vehicle's lighting system is protected from current spikes by fuses and circuit breakers.
Which of the following statements about an inline cylinder configuration is false?
cylinders can be completely vertical or slanted |
|
cylinders are configured in a single row |
|
works well in eight cylinder engines |
|
increases the length of the engine |
An inline cylinder configuration places the cylinders in a single row either completely vertical or slanted. Due to this arrangement, an inline cylinder configuration makes the engine longer and, although it works well in four cylinder engines, performace suffers in larger engines due to the difficulty in evenly distributing the air-fuel mixture over the length of the engine.
When a car engine is running, what provides electrical current to recharge the battery and power the electrical system?
solenoid |
|
battery |
|
alternator |
|
camshaft |
Once the engine is running, the alternator provides electrical current to recharge the battery and power the electrical system. The alternator is driven by the engine's crankshaft and produces alternating current (AC) which is then fed through a rectifier bridge to convert it to the direct current (DC) required by the electrical system. A voltage regulator controls the output of the alternator to maintain a consistent voltage (approx. 14.5 volts) in the electrical system regardless of load.