| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.10 |
| Score | 0% | 62% |
What's the name of the low-voltage winding in the ignition coil?
tertiary coil winding |
|
distributor coil winding |
|
primary coil winding |
|
secondary coil winding |
The ignition coil is a high-voltage transformer made up of two coils of wire. The primary coil winding is the low-voltage winding and has relatively few turns of heavy wire. The secondary coil winding is the high-voltage winding that surrounds the primary and is made up of thousands of turns of fine wire. Current flows from the battery through the primary coil winding which creates a changing magnetic field inside the secondary coil. This induces a very high-voltage current in the secondary coil which it feeds to the distributor.
Which of the following is not part of an engine's cooling system?
radiator |
|
coolant |
|
thermostat |
|
air conditioner |
The purpose of an automobile engine's cooling system is to circulate coolant around the engine so it can absorb and dissipate heat. The water pump pumps coolant through the various components in the system and the radiator cools down coolant after it has heated up after passing through the engine. The thermostat controls the flow of coolant based on engine temperature while the cooling fan draws air through the radiator when the car isn't moving fast enough for unforced air to cool things down on its own.
Control arms connect a vehicle's suspension to the frame. The connection to the wheels is through:
pins |
|
bushings |
|
ball joints |
|
knuckles |
Control arms (upper and lower) connect a vehicle's suspension to the frame. The connection to the wheels is through ball joints which allow the control arms to turn and move up and down simultaneously. The frame connection uses bushings.
The fuel injectors are fed fuel by the:
electric fuel pump |
|
powertrain control module |
|
fuel return line |
|
fuel pressure regulator |
The electric fuel pump feeds pressurized fuel through a fuel filter to the fuel injectors via the fuel rail manifold. The fuel rail contains the fuel pressure regulator which ensures that the fuel injectors receive fuel at a consistent and known rate. Excess fuel bled off by the pressure regulator returns to the fuel tank through the fuel return line.
How are the cylinders numbered in V-type engines?
sequentially from the back of the engine to the front |
|
alternating from the front of the engine to the back |
|
sequentially from the front of the engine to the back |
|
cylinder numbering varies by manufacturer |
In V-type engines the numbering sequence varies by manufacturer.