ASVAB Automotive Information Practice Test 386183 Results

Your Results Global Average
Questions 5 5
Correct 0 2.97
Score 0% 59%

Review

1

What is the primary difference between internal and external combustion engines?

48% Answer Correctly

the air-fuel mix for optimum combustion

the type of fuel used

where the power is developed

how the fuel is ignited


Solution

The primary difference between internal and external combustion engines lies in where the power is developed. In an internal combustion engine fuel is ignited and burned inside the same container where the power is developed while in an external combustion engine the fuel is ignited outside the engine and the resulting power sent to it.


2

Which of the following is not part of an engine's cooling system?

74% Answer Correctly

coolant

air conditioner

radiator

thermostat


Solution

The purpose of an automobile engine's cooling system is to circulate coolant around the engine so it can absorb and dissipate heat. The water pump pumps coolant through the various components in the system and the radiator cools down coolant after it has heated up after passing through the engine. The thermostat controls the flow of coolant based on engine temperature while the cooling fan draws air through the radiator when the car isn't moving fast enough for unforced air to cool things down on its own.


3

__________ are made with wide gap coils of rigid steel cable and both hold the vehicle chassis up off the ground and absorb energy from wheel movement making for a smoother ride.

67% Answer Correctly

ignition coils

shock absorbers

suspension springs

control arms


Solution

Suspension springs are made with wide gap coils of rigid steel cable and both hold the vehicle chassis up off the ground and absorb energy from wheel movement making for a smoother ride.


4

Which of the following is the result of combustion being initiated by a source other than the spark plug?

51% Answer Correctly

pre-ignition

ignition

detonation

pre-combustion


Solution

Normal combustion in an engine is initiated by a spark plug and results in the complete burning of the air-fuel mixture. If combustion is initiated by a source other than the spark plug, by a hot spot in the cylinder or combustion chamber for example, pre-ignition results. Detonation results if the air-fuel mixture explodes instead of burning. Detonation can cause extremes in pressure in the combustion chamber leading to engine damage.


5

Which of the following is the name for a transmission that incorporates the differential in one package?

57% Answer Correctly

transaxle

manual transmission

four-wheel drive transmission

automatic transmission


Solution

A differential is designed to drive a pair of wheels while allowing them to rotate at different speeds. A transaxle is a transmission that incorporates the differential in one package. Most front-wheel drive cars use a transaxle while rear-wheel drive cars use a transmission and separate differential connected via a drive shaft. The differential is incorporated into the drive axle which splits engine power delivered by the drive shaft between the two drive wheels. All-wheel drive cars typically use a transaxle that includes an output shaft to the rear differential.