| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.00 |
| Score | 0% | 60% |
The fuel pressure regulator ensures that the fuel injectors receive fuel at a consistent and known rate. The fuel pressure regulator is part of the:
electric fuel pump |
|
fuel filter |
|
fuel rail |
|
fuel manifold |
The electric fuel pump feeds pressurized fuel through a fuel filter to the fuel injectors via the fuel rail manifold. The fuel rail contains the fuel pressure regulator which ensures that the fuel injectors receive fuel at a consistent and known rate. Excess fuel bled off by the pressure regulator returns to the fuel tank through the fuel return line.
What does the timing belt do?
synchronizes the camshaft and the crankshaft |
|
synchronizes each piston to the crankshaft |
|
synchronizes the cam and the camshaft |
|
calibrates the speedometer |
Maintaining proper synchronization between the rotation of the camshaft and the rotation of the crankshaft is critical to ensure that the engine's valves open and close at the proper times during each cylinder's intake and exhaust strokes.
Which of the following is the name for a transmission that incorporates the differential in one package?
four-wheel drive transmission |
|
automatic transmission |
|
manual transmission |
|
transaxle |
A differential is designed to drive a pair of wheels while allowing them to rotate at different speeds. A transaxle is a transmission that incorporates the differential in one package. Most front-wheel drive cars use a transaxle while rear-wheel drive cars use a transmission and separate differential connected via a drive shaft. The differential is incorporated into the drive axle which splits engine power delivered by the drive shaft between the two drive wheels. All-wheel drive cars typically use a transaxle that includes an output shaft to the rear differential.
Which of the following cylinder arrangement would be most common in an eight cylinder engine?
vertical |
|
V-type |
|
inline |
|
opposed |
Cylinder number and arrangement depends on the purpose of the engine. Smaller (four and six cylinder) engines in front-wheel drive vehicles often use an inline design which orients cylinders vertically over the crankshaft and aligns them in a row. Other common orientations are a horizontal/opposed design which places cylinders flat facing each other with the crankshaft between them and a V-type design common in six and eight cylinder engines that features one cylinder head per block of cylinders oriented at a 60 to 90 degree angle to each other with the crankshaft at the bottom of the V.
What's the name of the low-voltage winding in the ignition coil?
primary coil winding |
|
secondary coil winding |
|
tertiary coil winding |
|
distributor coil winding |
The ignition coil is a high-voltage transformer made up of two coils of wire. The primary coil winding is the low-voltage winding and has relatively few turns of heavy wire. The secondary coil winding is the high-voltage winding that surrounds the primary and is made up of thousands of turns of fine wire. Current flows from the battery through the primary coil winding which creates a changing magnetic field inside the secondary coil. This induces a very high-voltage current in the secondary coil which it feeds to the distributor.