ASVAB Automotive Information Practice Test 433838 Results

Your Results Global Average
Questions 5 5
Correct 0 3.11
Score 0% 62%

Review

1

Which of the following receive signals from the powertrain control module (PCM) and carry out its instructions?

58% Answer Correctly

joints

valves

sensors

actuators


Solution

Actuators receive signals from the PCM and carry out adjustments needed based on the data the PCM received from the sensors.


2

The primary purpose of the muffler is to:

75% Answer Correctly

remove harmful gases from the exhaust

reclaim unburned fuel

cool the exhaust

quiet exhaust


Solution

The muffler follows the catalytic converter and absorbs sound to help quiet load exhaust. It is followed by the exhaust pipe which is the final exit point for exhaust gas from the vehicle.


3

What type of energy does an automotive battery produce?

59% Answer Correctly

direct current

alternating current

rotational energy

chemical energy


Solution

An automotive battery produces direct current for use by automotive systems.


4

Which of the following is the name for a transmission that incorporates the differential in one package?

57% Answer Correctly

four-wheel drive transmission

automatic transmission

manual transmission

transaxle


Solution

A differential is designed to drive a pair of wheels while allowing them to rotate at different speeds. A transaxle is a transmission that incorporates the differential in one package. Most front-wheel drive cars use a transaxle while rear-wheel drive cars use a transmission and separate differential connected via a drive shaft. The differential is incorporated into the drive axle which splits engine power delivered by the drive shaft between the two drive wheels. All-wheel drive cars typically use a transaxle that includes an output shaft to the rear differential.


5

Which engine stroke starts with the piston at top dead center?

61% Answer Correctly

intake stroke

exhaust stroke

compression stroke

power stroke


Solution

The four-stroke piston cycle of internal combustion engines starts with the piston at top of the cylinder head (top dead center or TDC) during the intake stroke. The piston moves downward in the cylinder creating a vacuum that pulls an air-fuel mix into the combustion chamber through the now open intake valve.