A connecting rod employs a wrist pin to link each piston to the engine's crankshaft.

The stroke cycle of an engine is governed by the crankshaft which serves to regulate the firing order of the cylinders. All cylinders are not on the same stroke at the same time and correct firing order is important to balance engine operation and minimize vibrations. A common firing order for four-cylinder engines is 1-3-4-2 which indicates that cylinders 1 and 3 fire (power stroke)together and cylinders 4 and 2 fire together.

The four-stroke piston cycle of internal combustion engines starts with the piston at top of the cylinder head (top dead center or TDC) during the intake stroke. The piston moves downward in the cylinder creating a vacuum that pulls an air-fuel mix into the combustion chamber through the now open intake valve.

The radiator is responsible for tranferring heat from the coolant to the outside air. Radiator hoses transfer coolant to and from the engine to the radiator and a radiator cap maintains pressure in the cooling system to increase the boiling point of the coolant mixture and thus allow it to absorb more heat.

The purpose of an automobile engine's cooling system is to circulate coolant around the engine so it can absorb and dissipate heat. The water pump pumps coolant through the various components in the system and the radiator cools down coolant after it has heated up after passing through the engine. The thermostat controls the flow of coolant based on engine temperature while the cooling fan draws air through the radiator when the car isn't moving fast enough for unforced air to cool things down on its own.