ASVAB Automotive Information Practice Test 484642 Results

Your Results Global Average
Questions 5 5
Correct 0 2.85
Score 0% 57%

Review

1

Control arms connect a vehicle's suspension to the frame. The connection to the frame uses:

49% Answer Correctly

knuckles

pins

bushings

ball joints


Solution

Control arms (upper and lower) connect a vehicle's suspension to the frame. The connection to the wheels is through ball joints which allow the control arms to turn and move up and down simultaneously. The frame connection uses bushings.


2

Which of the following is not a common vehicle cylinder arrangement?

49% Answer Correctly

opposed

inline

V-type

vertical


Solution

Cylinder number and arrangement depends on the purpose of the engine. Smaller (four and six cylinder) engines in front-wheel drive vehicles often use an inline design which orients cylinders vertically over the crankshaft and aligns them in a row. Other common orientations are a horizontal/opposed design which places cylinders flat facing each other with the crankshaft between them and a V-type design common in six and eight cylinder engines that features one cylinder head per block of cylinders oriented at a 60 to 90 degree angle to each other with the crankshaft at the bottom of the V.


3

Which of the following statements about fuel injection is false?

52% Answer Correctly

optimizes fuel delivery using various electronic engine sensors

relies on suction to draw fuel into the engine

atomizes fuel using high pressure and injects it into the engine

has replaced the carburetor as the primary fuel delivery system used in automotive engines


Solution

Fuel injection has replaced the carburetor as the primary automobile fuel delivery system. The main difference between the fuel injector and the carburetor is that fuel injection atomizes the fuel by forcibly pumping it through a small nozzle under high pressure while a carburetor relies on suction to draw fuel into an accelerated intake air stream.


4

Which of the following is not a function of a car battery?

50% Answer Correctly

delivers supplemental current when the alternator can't handle high electrical system loads

acts as a supplemental source of energy to moderate engine performance

acts as an electrical reservoir for excessive current

delivers current to the ignition system to start the engine


Solution

The lead-acid battery is the core of the electrical system, providing current to the ignition system to start the engine as well as delivering supplemental current when the alternator can't handle high electrical system loads and acting as an electrical reservoir for excessive current.


5

A cylinders acts as a guide for a:

82% Answer Correctly

valve

driveshaft

camshaft

piston


Solution

Cylinders act as a guide for the pistons that translate the heat energy of combustion into the mechanical energy necessary to move a vehicle. Piston rings seal the piston to the cylinder to contain combustion gases and also regulate the oil distribution between the piston and cylinder wall. A cylinder head closes in the top of the cylinder forming the combustion chamber which is sealed by a head gasket (head). The head provides space for air and fuel intake valves, exhaust valves, and mounts for spark plugs and fuel injectors.