ASVAB Automotive Information Practice Test 504691 Results

Your Results Global Average
Questions 5 5
Correct 0 3.38
Score 0% 68%

Review

1

Modern car engines are cooled by:

81% Answer Correctly

liquid

air

ice

air conditioner


Solution

Modern car engines are cooled by liquid which circulates through the engine block and cylinder heads absorbing excess heat. This liquid is made up of half water and half antifreeze (commonly, ethylene glycol) which both keeps the water from freezing at low temperatures and raises its boiling point making heat transfer more efficient.


2

What is the function of the head gasket?

75% Answer Correctly

to connect the transmission to the drive train

to seal the engine block from the cylinders

to seal the exhaust system from the drive train

to seal the brake assembly from external contaminants


Solution

A head gasket is a gasket that sits between the engine block and cylinder heads to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinders.


3

The stoichiometric ratio is approximately:

70% Answer Correctly

1:1

1:14.7

14.7:1

14.7


Solution

The stoichiometric ratio defines the proper ratio of air to fuel necessary so that an engine burns all fuel with no excess air. For gasoline fuel, the stoichiometric ratio is about 14.7:1 or for every one gram of fuel, 14.7 grams of air are required. Too much air results in a lean air-fuel mixture that burns more slowly and hotter while too much fuel results in a rich mixture that burns quicker and cooler.


4

Control arms connect a vehicle's suspension to the frame. The connection to the wheels is through:

71% Answer Correctly

knuckles

pins

ball joints

bushings


Solution

Control arms (upper and lower) connect a vehicle's suspension to the frame. The connection to the wheels is through ball joints which allow the control arms to turn and move up and down simultaneously. The frame connection uses bushings.


5

The fuel pressure regulator ensures that the fuel injectors receive fuel at a consistent and known rate. The fuel pressure regulator is part of the:

40% Answer Correctly

fuel manifold

electric fuel pump

fuel filter

fuel rail


Solution

The electric fuel pump feeds pressurized fuel through a fuel filter to the fuel injectors via the fuel rail manifold. The fuel rail contains the fuel pressure regulator which ensures that the fuel injectors receive fuel at a consistent and known rate. Excess fuel bled off by the pressure regulator returns to the fuel tank through the fuel return line.