| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.02 |
| Score | 0% | 60% |
How are the cylinders numbered in V-type engines?
alternating from the front of the engine to the back |
|
cylinder numbering varies by manufacturer |
|
sequentially from the back of the engine to the front |
|
sequentially from the front of the engine to the back |
In V-type engines the numbering sequence varies by manufacturer.
Which of the following is not a component in the engine lubrication system?
pressure relief valve |
|
differential |
|
oil filter |
|
pickup tube |
In engine lubrication, oil remains in the oil pan until the engine is turned on. It then gets sucked up the pickup tube by the oil pump and pressurized. This pressure is moderated by the pressure relief valve and the oil is fed through the oil filter into the engine to lubricate it.
The wheel __________ is the mounting point for the wheel and tire assembly.
base |
|
knuckle |
|
shaft |
|
hub |
The wheel hub is the mounting point for the wheel and tire assembly. The wheel hub can rotate while being held stable by the steering knuckle which applies the motion of the control arms to the wheels.
Which of the following is the correct order for the engine stroke cycle?
intake, compression, power, exhaust |
|
power, intake, compression, exhaust |
|
compression, intake, power, exhaust |
|
intake, power, compression, exhaust |
The stroke cycle order is intake stroke, compression stroke, power stroke, exhaust stroke.
What function does a two-stroke cycle engine perform on the second stroke?
fuel intake and compression |
|
fuel intake and exhaust |
|
combustion and exhaust |
|
compression and combustion |
The two strokes of a two-stroke cycle engine are fuel intake and compression then combustion and exhaust.