ASVAB Automotive Information Practice Test 576779 Results

Your Results Global Average
Questions 5 5
Correct 0 3.11
Score 0% 62%

Review

1

The air-fuel mixture is delivered to the combustion chamber by a(n):

76% Answer Correctly

fuel valve

intake valve

exhaust valve

air valve


Solution

The combustion chamber is located in the cylinder head and contains the combustion of the air-fuel mixture. This mixture is delivered by an intake valve and the waste gases from combustion are removed from the combustion chamber by the exhaust valve.


2

Which of the following is the result of combustion being initiated by a source other than the spark plug?

51% Answer Correctly

pre-combustion

ignition

pre-ignition

detonation


Solution

Normal combustion in an engine is initiated by a spark plug and results in the complete burning of the air-fuel mixture. If combustion is initiated by a source other than the spark plug, by a hot spot in the cylinder or combustion chamber for example, pre-ignition results. Detonation results if the air-fuel mixture explodes instead of burning. Detonation can cause extremes in pressure in the combustion chamber leading to engine damage.


3

Which of the following is not a function of antifreeze?

54% Answer Correctly

aids heat transfer

lubricates the cooling system

raises the boiling point of water

keeps water from freezing at low temperatures


Solution

Modern car engines are cooled by liquid which circulates through the engine block and cylinder heads absorbing excess heat. This liquid is made up of half water and half antifreeze (commonly, ethylene glycol) which both keeps the water from freezing at low temperatures and raises its boiling point making heat transfer more efficient.


4

Which of the following statements about v-type cyllinder arrangement is false?

65% Answer Correctly

common in motorcycles, cars, and trucks

has an odd number of cylinders

has two rows of cylinders

engine is shorter than an inline engine


Solution

A v-arrangement has two rows of cylinders in a V-shaped block with a crankshaft at the bottom of the V. Any even number of cylinders is possible in this configuration from the V-2 that's commonly used in motorcycles up to V-12 or bigger for large trucks. The V design produces a shorter engine than an in-line cylinder configuration and allows for better air-fuel distribution.


5

Which of the following is not a function of the oil pan?

62% Answer Correctly

screens debris from oil

acts as the engine oil reservoir

cools engine oil

feeds the oil pump


Solution

The oil pan contains the engine oil reservoir of from four to six quarts of oil and feeds the oil pump through the oil pickup tube. An oil strainer floats at the top of the oil in the oil pan and screens debris from the oil before feeding it to the oil pump.