The muffler follows the catalytic converter and absorbs sound to help quiet load exhaust. It is followed by the exhaust pipe which is the final exit point for exhaust gas from the vehicle.

Ignition timing defines the point in time at the end of the compression stroke that the spark plug fires. Measured in number of degrees before top dead center (BTDC), the exact point that the spark plugs initiate combustion varies depending on the speed of the engine. The timing is advanced (the spark plugs fire a few more degrees BTDC) when the engine is running faster and retarded when it's running slower.

Maintaining proper synchronization between the rotation of the camshaft and the rotation of the crankshaft is critical to ensure that the engine's valves open and close at the proper times during each cylinder's intake and exhaust strokes.

The thermostat controls coolant (and, through it, engine) temperature by regulating the flow of coolant through the radiator. A bypass tube allows coolant to bypass the radiator and flow back into the water pump when its temperature is low enough that the thermostat is closed.

An independent suspension allows the wheels on either side of an axle to move independently from each other. The fact that the left front wheel didn't move up in response to the right front wheel moving down is evidence of this.