A half shaft is a drive axle that extends from a transaxle or differential to one of the drive wheels. There are two half shafts per drive axle, one for each wheel, each doing "half" the job.

The ignition coil is a high-voltage transformer made up of two coils of wire. The primary coil winding is the low-voltage winding and has relatively few turns of heavy wire. The secondary coil winding is the high-voltage winding that surrounds the primary and is made up of thousands of turns of fine wire. Current flows from the battery through the primary coil winding which creates a changing magnetic field inside the secondary coil. This induces a very high-voltage current in the secondary coil which it feeds to the distributor.

The engine (or cylinder) block is the large casing that contains the cylinders and many of the internal components of the engine.

The battery supplies the power necessary to start the engine when the ignition switch is is turned on.

The master (brake) cylinder converts pressure on the brake pedal to hydraulic pressure in the brake lines.