The water pump is driven by a belt connected to the crankshaft and ensures that coolant moves through the engine and radiator.

A head gasket is a gasket that sits between the engine block and cylinder heads to seal the cylinders to ensure maximum compression and avoid leakage of coolant or engine oil into the cylinders.

Cylinders act as a guide for the pistons that translate the heat energy of combustion into the mechanical energy necessary to move a vehicle. Piston rings seal the piston to the cylinder to contain combustion gases and also regulate the oil distribution between the piston and cylinder wall. A cylinder head closes in the top of the cylinder forming the combustion chamber which is sealed by a head gasket (head). The head provides space for air and fuel intake valves, exhaust valves, and mounts for spark plugs and fuel injectors.

The stoichiometric ratio defines the proper ratio of air to fuel necessary so that an engine burns all fuel with no excess air. For gasoline fuel, the stoichiometric ratio is about 14.7:1 or for every one gram of fuel, 14.7 grams of air are required. Too much air results in a lean air-fuel mixture that burns more slowly and hotter while too much fuel results in a rich mixture that burns quicker and cooler.

The purpose of an automobile engine's cooling system is to circulate coolant around the engine so it can absorb and dissipate heat. The water pump pumps coolant through the various components in the system and the radiator cools down coolant after it has heated up after passing through the engine. The thermostat controls the flow of coolant based on engine temperature while the cooling fan draws air through the radiator when the car isn't moving fast enough for unforced air to cool things down on its own.