ASVAB Automotive Information Practice Test 664402 Results

Your Results Global Average
Questions 5 5
Correct 0 3.23
Score 0% 65%

Review

1

The two major types of vehicle braking systems are:

77% Answer Correctly

drum and shoe

disc and shoe

drum and disc

hydraulic and shoe


Solution

Brakes utlize friction to slow vehicle tires. Drum brakes employ a cast iron drum that roates with the vehicle axle. When hydraulic pressure is applied to the brake assemblies at the wheels, internal pistons expand and push brake shoes outward into contact with the brake drum slowing the rotation of the axle. More powerful disc brakes operate by pinching a rotating disc betweeen two brake pads and allow for a larger surface area to contact the disc, provide more force, and are more easily cooled.


2

What cylinder arrangement would be most common in a four cylinder front-wheel drive vehicle?

66% Answer Correctly

vertical

opposed

inline

V-type


Solution

Cylinder number and arrangement depends on the purpose of the engine. Smaller (four and six cylinder) engines in front-wheel drive vehicles often use an inline design which orients cylinders vertically over the crankshaft and aligns them in a row. Other common orientations are a horizontal/opposed design which places cylinders flat facing each other with the crankshaft between them and a V-type design common in six and eight cylinder engines that features one cylinder head per block of cylinders oriented at a 60 to 90 degree angle to each other with the crankshaft at the bottom of the V.


3

A constant velocity (CV) joint is closely related to which of the following?

63% Answer Correctly

sprint joint

ball joint

universal joint

master cylinder


Solution

Like CV joints, universal joints (U-joints) are located at each end of a drive shaft and allow the shaft to operate at a variable angle with the item it is driving. Universal joints perform the same basic function as CV joints but CV joints have a wider range of operation.


4

Which of the following statements about fuel injection is false?

52% Answer Correctly

has replaced the carburetor as the primary fuel delivery system used in automotive engines

optimizes fuel delivery using various electronic engine sensors

atomizes fuel using high pressure and injects it into the engine

relies on suction to draw fuel into the engine


Solution

Fuel injection has replaced the carburetor as the primary automobile fuel delivery system. The main difference between the fuel injector and the carburetor is that fuel injection atomizes the fuel by forcibly pumping it through a small nozzle under high pressure while a carburetor relies on suction to draw fuel into an accelerated intake air stream.


5

Engine oil viscosity is rated using the format XW-XX with the number preceding the W indicating viscosity at __________ ℉ and the XX indicating viscosity at __________ ℃.

65% Answer Correctly

100, 100

0, 100

100, 0

0, 0


Solution

The primary component of the lubrication system is engine oil. Engines require oil blends with different thickness (viscosity) and additives depending on their operating conditions. Viscosity is rated using the format XW-XX with the number preceding the W (winter) rating the oil’s viscosity at 0 ℉ (-17.8 ℃) and the XX indicating viscosity at 100 ℃.