ASVAB Automotive Information Practice Test 670939 Results

Your Results Global Average
Questions 5 5
Correct 0 3.23
Score 0% 65%

Review

1

Which of the following transfers the torque from the transmission to the drive wheels at a constant speed while accomodating the up and down movement of the suspension?

68% Answer Correctly

control arms

constant velocity (CV) joint

springs

transfer case


Solution

Constant velocity (CV) joints are located at both ends of a half shaft and their purpose is to transfer the torque from the transmission to the drive wheels at a constant speed while accomodating the up and down movement of the suspension. The inner CV joint connects the shaft to the transmission and the outer CV joint connects the shaft to the wheel.


2

The piston moves downward in the cylinder creating a vacuum that pulls an air-fuel mix into the combustion chamber. This describes which engine stroke?

68% Answer Correctly

power

exhaust

intake

compression


Solution

The four-stroke piston cycle of internal combustion engines starts with the piston at top of the cylinder head (top dead center or TDC) during the intake stroke. The piston moves downward in the cylinder creating a vacuum that pulls an air-fuel mix into the combustion chamber through the now open intake valve.


3

Which of the following is the result of combustion being initiated by a source other than the spark plug?

51% Answer Correctly

detonation

pre-combustion

pre-ignition

ignition


Solution

Normal combustion in an engine is initiated by a spark plug and results in the complete burning of the air-fuel mixture. If combustion is initiated by a source other than the spark plug, by a hot spot in the cylinder or combustion chamber for example, pre-ignition results. Detonation results if the air-fuel mixture explodes instead of burning. Detonation can cause extremes in pressure in the combustion chamber leading to engine damage.


4

Which of the following is a common firing order for four-cylinder engines?

66% Answer Correctly

3-1-2-4

1-2-3-4

4-3-2-1

1-3-4-2


Solution

The stroke cycle of an engine is governed by the crankshaft which serves to regulate the firing order of the cylinders. All cylinders are not on the same stroke at the same time and correct firing order is important to balance engine operation and minimize vibrations. A common firing order for four-cylinder engines is 1-3-4-2 which indicates that cylinders 1 and 3 fire (power stroke)together and cylinders 4 and 2 fire together.


5

The stoichiometric ratio is approximately:

70% Answer Correctly

14.7:1

1:1

14.7

1:14.7


Solution

The stoichiometric ratio defines the proper ratio of air to fuel necessary so that an engine burns all fuel with no excess air. For gasoline fuel, the stoichiometric ratio is about 14.7:1 or for every one gram of fuel, 14.7 grams of air are required. Too much air results in a lean air-fuel mixture that burns more slowly and hotter while too much fuel results in a rich mixture that burns quicker and cooler.