| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.35 |
| Score | 0% | 67% |
A __________ is designed to drive a pair of wheels while allowing them to rotate at different speeds.
differential |
|
half shaft |
|
transfer case |
|
CV joint |
A differential is designed to drive a pair of wheels while allowing them to rotate at different speeds. A transaxle is a transmission that incorporates the differential in one package. Most front-wheel drive cars use a transaxle while rear-wheel drive cars use a transmission and separate differential connected via a drive shaft. The differential is incorporated into the drive axle which splits engine power delivered by the drive shaft between the two drive wheels. All-wheel drive cars typically use a transaxle that includes an output shaft to the rear differential.
What type of energy does an automotive battery produce?
alternating current |
|
rotational energy |
|
chemical energy |
|
direct current |
An automotive battery produces direct current for use by automotive systems.
The intake ports on the cylinder heads is fed outside air via the:
intake manifold |
|
intake pressure regulator |
|
intake air pump |
|
intake control module |
The intake manifold distributes outside air to the intake ports on the cylinder heads. The intake air filter removes any airborne contaminants before the air enters the engine.
The radiator is responsible for tranferring heat from the coolant to:
outside air |
|
engine block |
|
cylinder heads |
|
thermostat |
The radiator is responsible for tranferring heat from the coolant to the outside air. Radiator hoses transfer coolant to and from the engine to the radiator and a radiator cap maintains pressure in the cooling system to increase the boiling point of the coolant mixture and thus allow it to absorb more heat.
The fluid reservoir stores the __________ that the master cylinder uses to maintain hydraulic pressure.
ethylene glycol |
|
brake fluid |
|
air |
|
brake oil |
The fluid reservoir stores the brake fluid that the master cylinder uses to maintain hydraulic pressure.