An inline cylinder configuration places the cylinders in a single row either completely vertical or slanted. Due to this arrangement, an inline cylinder configuration makes the engine longer and, although it works well in four cylinder engines, performace suffers in larger engines due to the difficulty in evenly distributing the air-fuel mixture over the length of the engine.

The ignition coil steps up the 12 volts available from the battery or alternator to a voltage of 30,000 or more volts at the spark plug. Converting a lower voltage input into a higher voltage output makes the ignition coil a step-up transformer.

In V-type engines the numbering sequence varies by manufacturer.

Suspension springs are made with wide gap coils of rigid steel cable and both hold the vehicle chassis up off the ground and absorb energy from wheel movement making for a smoother ride.

Both drum brake and disc brake assemblies use friction to stop a car's wheels from turning but each do it in a slightly different way. A drum brake assembly uses a large iron drum attached to the wheel and brake shoes that press against the drum to slow the rotation of the drum and, consequently, the wheel. A disc brake assembly employs friction in the same way as a drum brake but instead uses a rotor, also attached to the wheel, and two brake pads that squeeze against the surface of the rotor.