Cylinders act as a guide for the pistons that translate the heat energy of combustion into the mechanical energy necessary to move a vehicle. Piston rings seal the piston to the cylinder to contain combustion gases and also regulate the oil distribution between the piston and cylinder wall. A cylinder head closes in the top of the cylinder forming the combustion chamber which is sealed by a head gasket (head). The head provides space for air and fuel intake valves, exhaust valves, and mounts for spark plugs and fuel injectors.

Opposed cylinder designs place cylinders flat in two rows 180° opposite each other with a single crankshaft running between them.

The master (brake) cylinder converts pressure on the brake pedal to hydraulic pressure in the brake lines.

The oil pump is driven by the camshaft and is responsible for pumping oil through the oil galleries (passages) that run throughout the engine. It also contains the oil filter and a pressure relief valve which prevents excessive pressure from building up in the lubrication system.

The catalytic converter converts pollutants in exhaust gas into less pollutant substances like carbon dioxide and water.