ASVAB Automotive Information Practice Test 783433 Results

Your Results Global Average
Questions 5 5
Correct 0 2.99
Score 0% 60%

Review

1

Which of the following is not a part of the oil pump?

38% Answer Correctly

oil filter

pressure relief valve

all of these are part of the oil pump

oil galleries


Solution

The oil pump is driven by the camshaft and is responsible for pumping oil through the oil galleries (passages) that run throughout the engine. It also contains the oil filter and a pressure relief valve which prevents excessive pressure from building up in the lubrication system.


2

Which of the following is the result of combustion being initiated by a source other than the spark plug?

51% Answer Correctly

detonation

pre-ignition

ignition

pre-combustion


Solution

Normal combustion in an engine is initiated by a spark plug and results in the complete burning of the air-fuel mixture. If combustion is initiated by a source other than the spark plug, by a hot spot in the cylinder or combustion chamber for example, pre-ignition results. Detonation results if the air-fuel mixture explodes instead of burning. Detonation can cause extremes in pressure in the combustion chamber leading to engine damage.


3

Which of the following cylinder arrangement would be most common in an eight cylinder engine?

80% Answer Correctly

V-type

opposed

inline

vertical


Solution

Cylinder number and arrangement depends on the purpose of the engine. Smaller (four and six cylinder) engines in front-wheel drive vehicles often use an inline design which orients cylinders vertically over the crankshaft and aligns them in a row. Other common orientations are a horizontal/opposed design which places cylinders flat facing each other with the crankshaft between them and a V-type design common in six and eight cylinder engines that features one cylinder head per block of cylinders oriented at a 60 to 90 degree angle to each other with the crankshaft at the bottom of the V.


4

Which of the following statements about an inline cylinder configuration is false?

54% Answer Correctly

works well in eight cylinder engines

increases the length of the engine

cylinders can be completely vertical or slanted

cylinders are configured in a single row


Solution

An inline cylinder configuration places the cylinders in a single row either completely vertical or slanted. Due to this arrangement, an inline cylinder configuration makes the engine longer and, although it works well in four cylinder engines, performace suffers in larger engines due to the difficulty in evenly distributing the air-fuel mixture over the length of the engine.


5

The __________ provides the appropriate power to vehicle wheels to maintain a given speed.

75% Answer Correctly

transmission

transaxle

gearbox

ignition coil


Solution

The transmission provides the appropriate power to vehicle wheels to maintain a given speed. The engine and the transmission have to be disconnected to shift gears and a manual transmission requires the driver to manually manage this disconnection (using a clutch) and to manually shift gears. An automatic transmission is essentially an automatic gear shifter and handles this process without driver input.