ASVAB Automotive Information Practice Test 795502 Results

Your Results Global Average
Questions 5 5
Correct 0 3.63
Score 0% 73%

Review

1

In a four-stroke piston cycle, one piston is always:

84% Answer Correctly

delivering power

all of these are correct

exhausting gases

compressing the air-fuel mixture


Solution

In a four-stroke cycle engine there is always one piston delivering power, one exhausting gases, one drawing in the air-fuel mixture, and one compressing that mixture.


2

What is the large casing that contains the cylinders and many of the internal components of the engine?

82% Answer Correctly

engine block

transmission

chassis

manifold


Solution

The engine (or cylinder) block is the large casing that contains the cylinders and many of the internal components of the engine.


3

Power brakes multiply the force a driver applies to the brake pedal using a __________ connected to the engine intake manifold.

54% Answer Correctly

speed sensor

vacuum booster

cylinder

brake line


Solution

Power brakes multiply the force a driver applies to the brake pedal using a vacuum booster connected to the engine intake manifold. This provides for much higher hydraulic pressure in the braking system than could be generated by the driver alone. Antilock brakes (ABS) use speed sensors and adjust the brake pressure at each wheel to prevent skidding and allow the driver more steering control in slippery conditions.


4

Another name for the powertrain control module is the __________ control unit.

54% Answer Correctly

electrical

universal

engine

transmission


Solution

The main computer or powertrain control module (PCM) uses pre-programmed software to analyze the input received from sensors and produce output signals to adjust vehicle performance and operation. (Engine control unit (ECU) is another name for the PCM.)


5

Waste gases from combustion are removed from the combustion chamber by the:

86% Answer Correctly

head gasket

piston

exhaust valve

camshaft


Solution

The combustion chamber is located in the cylinder head and contains the combustion of the air-fuel mixture. This mixture is delivered by an intake valve and the waste gases from combustion are removed from the combustion chamber by the exhaust valve.