| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.30 |
| Score | 0% | 66% |
Engine oil viscosity is rated using the format XW-XX with the number preceding the W indicating viscosity at __________ ℉ and the XX indicating viscosity at __________ ℃.
0, 0 |
|
100, 0 |
|
0, 100 |
|
100, 100 |
The primary component of the lubrication system is engine oil. Engines require oil blends with different thickness (viscosity) and additives depending on their operating conditions. Viscosity is rated using the format XW-XX with the number preceding the W (winter) rating the oil’s viscosity at 0 ℉ (-17.8 ℃) and the XX indicating viscosity at 100 ℃.
What cylinder arrangement would be most common in a four cylinder front-wheel drive vehicle?
vertical |
|
opposed |
|
V-type |
|
inline |
Cylinder number and arrangement depends on the purpose of the engine. Smaller (four and six cylinder) engines in front-wheel drive vehicles often use an inline design which orients cylinders vertically over the crankshaft and aligns them in a row. Other common orientations are a horizontal/opposed design which places cylinders flat facing each other with the crankshaft between them and a V-type design common in six and eight cylinder engines that features one cylinder head per block of cylinders oriented at a 60 to 90 degree angle to each other with the crankshaft at the bottom of the V.
When a car engine is running, what provides electrical current to recharge the battery and power the electrical system?
battery |
|
solenoid |
|
camshaft |
|
alternator |
Once the engine is running, the alternator provides electrical current to recharge the battery and power the electrical system. The alternator is driven by the engine's crankshaft and produces alternating current (AC) which is then fed through a rectifier bridge to convert it to the direct current (DC) required by the electrical system. A voltage regulator controls the output of the alternator to maintain a consistent voltage (approx. 14.5 volts) in the electrical system regardless of load.
Exhaust gases from cylinder exhaust valves are collected by the:
catalytic converter |
|
exhaust manifolds |
|
muffler |
|
tail pipe |
The cast iron exhaust manifolds collect engine exhaust gas from multiple cylinder exhaust valves and deliver it to the exhaust pipe. Exhaust manifolds can be generic or specially tuned (header pipes) to the engine. Header pipes deliver higher performance but are more expensive and less durable.
Control arms connect a vehicle's suspension to the frame. The connection to the frame uses:
ball joints |
|
bushings |
|
knuckles |
|
pins |
Control arms (upper and lower) connect a vehicle's suspension to the frame. The connection to the wheels is through ball joints which allow the control arms to turn and move up and down simultaneously. The frame connection uses bushings.