| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.88 |
| Score | 0% | 58% |
The spark plugs fire a few extra degrees before top dead center when the engine is running faster. In this case the engine's timing is:
advanced |
|
asynchronous |
|
retarded |
|
synchronous |
Ignition timing defines the point in time at the end of the compression stroke that the spark plug fires. Measured in number of degrees before top dead center (BTDC), the exact point that the spark plugs initiate combustion varies depending on the speed of the engine. The timing is advanced (the spark plugs fire a few more degrees BTDC) when the engine is running faster and retarded when it's running slower.
Power brakes multiply the force a driver applies to the brake pedal using a __________ connected to the engine intake manifold.
cylinder |
|
vacuum booster |
|
speed sensor |
|
brake line |
Power brakes multiply the force a driver applies to the brake pedal using a vacuum booster connected to the engine intake manifold. This provides for much higher hydraulic pressure in the braking system than could be generated by the driver alone. Antilock brakes (ABS) use speed sensors and adjust the brake pressure at each wheel to prevent skidding and allow the driver more steering control in slippery conditions.
For inline cylinder arrangements in an engine, how are the cylinders numbered?
sequentially from the front of the engine to the back |
|
sequentially from the back of the engine to the front |
|
alternating from the front of the engine to the back |
|
alternating from the back of the engine to the front |
Inline cylinder arrangements number cylinders sequentially (1, 2, 3, ...) front to rear.
The catalytic converter output consists primarily of:
water and carbon dioxide |
|
carbon monoxide |
|
oxygen |
|
gasoline |
The catalytic converter converts pollutants in exhaust gas into less pollutant substances like carbon dioxide and water.
Which of the following regulates the flow of coolant through the radiator?
thermostat |
|
crankshaft |
|
water jacket |
|
water pump |
The thermostat controls coolant (and, through it, engine) temperature by regulating the flow of coolant through the radiator. A bypass tube allows coolant to bypass the radiator and flow back into the water pump when its temperature is low enough that the thermostat is closed.