| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.62 |
| Score | 0% | 72% |
The steering __________ transfers the motion of the steering gear output shaft to the steering arms that turn the wheels.
arms |
|
cylinder |
|
column |
|
linkage |
The steering linkage is a system of pivots and connecting parts between the steering gear and the control arms. The steering linkage transfers the motion of the steering gear output shaft to the steering arms that turn the wheels.
The vehicle's computer system gets data from:
actuators |
|
inhibitors |
|
sensors |
|
regulators |
Sensors provide the data necessary for the vehicle's computer to make decisions and monitor everything from simple vehicle information like tire pressure to complexities like the chemical content of an engine's exhaust.
The __________ splits engine power between the front and rear axles of four-wheel drive vehicles.
transmission linkage |
|
master cylinder |
|
transfer case |
|
universal joint |
The transfer case splits engine power between the front and rear axles of four-wheel drive vehicles.
Which of these is not necessary for combustion?
accelerant |
|
fuel |
|
air |
|
heat source |
Combustion is the burning of an air-fuel mixture to provide energy. It requires the presence of air, fuel, and a heat source to ignite the air-fuel mixture. In the internal combustion engine that powers automobiles and trucks the combustion happens inside the engine utilzing a fuel like gasoline, diesel fuel, or natural gas.
The primary purpose of the muffler is to:
reclaim unburned fuel |
|
cool the exhaust |
|
quiet exhaust |
|
remove harmful gases from the exhaust |
The muffler follows the catalytic converter and absorbs sound to help quiet load exhaust. It is followed by the exhaust pipe which is the final exit point for exhaust gas from the vehicle.