Fuel injection has replaced the carburetor as the primary automobile fuel delivery system. The main difference between the fuel injector and the carburetor is that fuel injection atomizes the fuel by forcibly pumping it through a small nozzle under high pressure while a carburetor relies on suction to draw fuel into an accelerated intake air stream.

Once the engine is running, the alternator provides electrical current to recharge the battery and power the electrical system. The alternator is driven by the engine's crankshaft and produces alternating current (AC) which is then fed through a rectifier bridge to convert it to the direct current (DC) required by the electrical system. A voltage regulator controls the output of the alternator to maintain a consistent voltage (approx. 14.5 volts) in the electrical system regardless of load.

Cylinder number and arrangement depends on the purpose of the engine. Smaller (four and six cylinder) engines in front-wheel drive vehicles often use an inline design which orients cylinders vertically over the crankshaft and aligns them in a row. Other common orientations are a horizontal/opposed design which places cylinders flat facing each other with the crankshaft between them and a V-type design common in six and eight cylinder engines that features one cylinder head per block of cylinders oriented at a 60 to 90 degree angle to each other with the crankshaft at the bottom of the V.

The electric fuel pump feeds pressurized fuel through a fuel filter to the fuel injectors via the fuel rail manifold. The fuel rail contains the fuel pressure regulator which ensures that the fuel injectors receive fuel at a consistent and known rate. Excess fuel bled off by the pressure regulator returns to the fuel tank through the fuel return line.

The purpose of an automobile engine's cooling system is to circulate coolant around the engine so it can absorb and dissipate heat. The water pump pumps coolant through the various components in the system and the radiator cools down coolant after it has heated up after passing through the engine. The thermostat controls the flow of coolant based on engine temperature while the cooling fan draws air through the radiator when the car isn't moving fast enough for unforced air to cool things down on its own.