| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.45 |
| Score | 0% | 69% |
When a car engine is running, what provides electrical current to recharge the battery and power the electrical system?
battery |
|
alternator |
|
camshaft |
|
solenoid |
Once the engine is running, the alternator provides electrical current to recharge the battery and power the electrical system. The alternator is driven by the engine's crankshaft and produces alternating current (AC) which is then fed through a rectifier bridge to convert it to the direct current (DC) required by the electrical system. A voltage regulator controls the output of the alternator to maintain a consistent voltage (approx. 14.5 volts) in the electrical system regardless of load.
The air-fuel mixture is delivered to the combustion chamber by a(n):
air valve |
|
fuel valve |
|
exhaust valve |
|
intake valve |
The combustion chamber is located in the cylinder head and contains the combustion of the air-fuel mixture. This mixture is delivered by an intake valve and the waste gases from combustion are removed from the combustion chamber by the exhaust valve.
Gases from combustion are pushed out through the exhaust valve as the piston travels up the cylinder to top dead center. This describes which engine stroke?
intake |
|
compression |
|
exhaust |
|
power |
During the exhaust stroke, just before the piston reaches bottom dead center the exhaust valve opens. The resulting gases from combustion are then pushed out through the exhaust valve as the piston travels up the cylinder to top dead center, completing stroke four of the four-stroke piston cycle.
Which of the following statements about an inline cylinder configuration is false?
cylinders are configured in a single row |
|
increases the length of the engine |
|
works well in eight cylinder engines |
|
cylinders can be completely vertical or slanted |
An inline cylinder configuration places the cylinders in a single row either completely vertical or slanted. Due to this arrangement, an inline cylinder configuration makes the engine longer and, although it works well in four cylinder engines, performace suffers in larger engines due to the difficulty in evenly distributing the air-fuel mixture over the length of the engine.
Exhaust gases from cylinder exhaust valves are collected by the:
exhaust manifolds |
|
tail pipe |
|
muffler |
|
catalytic converter |
The cast iron exhaust manifolds collect engine exhaust gas from multiple cylinder exhaust valves and deliver it to the exhaust pipe. Exhaust manifolds can be generic or specially tuned (header pipes) to the engine. Header pipes deliver higher performance but are more expensive and less durable.