ASVAB Automotive Information Practice Test 912193 Results

Your Results Global Average
Questions 5 5
Correct 0 2.97
Score 0% 59%

Review

1

How are the cylinders numbered in V-type engines?

42% Answer Correctly

sequentially from the front of the engine to the back

cylinder numbering varies by manufacturer

alternating from the front of the engine to the back

sequentially from the back of the engine to the front


Solution

In V-type engines the numbering sequence varies by manufacturer.


2

Ignition timing defines the point in time at the end of the compression stroke that which of the following happens?

69% Answer Correctly

exhaust valve opens

spark plugs fire

the air-fuel mixture enters

intake valve opens


Solution

Ignition timing defines the point in time at the end of the compression stroke that the spark plug fires. Measured in number of degrees before top dead center (BTDC), the exact point that the spark plugs initiate combustion varies depending on the speed of the engine. The timing is advanced (the spark plugs fire a few more degrees BTDC) when the engine is running faster and retarded when it's running slower.


3

What cylinder arrangement would be most common in a four cylinder front-wheel drive vehicle?

66% Answer Correctly

vertical

inline

opposed

V-type


Solution

Cylinder number and arrangement depends on the purpose of the engine. Smaller (four and six cylinder) engines in front-wheel drive vehicles often use an inline design which orients cylinders vertically over the crankshaft and aligns them in a row. Other common orientations are a horizontal/opposed design which places cylinders flat facing each other with the crankshaft between them and a V-type design common in six and eight cylinder engines that features one cylinder head per block of cylinders oriented at a 60 to 90 degree angle to each other with the crankshaft at the bottom of the V.


4

What's the name of the low-voltage winding in the ignition coil?

57% Answer Correctly

distributor coil winding

tertiary coil winding

primary coil winding

secondary coil winding


Solution

The ignition coil is a high-voltage transformer made up of two coils of wire. The primary coil winding is the low-voltage winding and has relatively few turns of heavy wire. The secondary coil winding is the high-voltage winding that surrounds the primary and is made up of thousands of turns of fine wire. Current flows from the battery through the primary coil winding which creates a changing magnetic field inside the secondary coil. This induces a very high-voltage current in the secondary coil which it feeds to the distributor.


5

Which engine stroke starts with the piston at top dead center?

61% Answer Correctly

power stroke

exhaust stroke

compression stroke

intake stroke


Solution

The four-stroke piston cycle of internal combustion engines starts with the piston at top of the cylinder head (top dead center or TDC) during the intake stroke. The piston moves downward in the cylinder creating a vacuum that pulls an air-fuel mix into the combustion chamber through the now open intake valve.