ASVAB Electronics Information Practice Test 106679 Results

Your Results Global Average
Questions 5 5
Correct 0 2.83
Score 0% 57%

Review

1

The electrical potential difference between two points is called:

60% Answer Correctly

current

conductance

voltage

resistance


Solution

Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.


2

Capacitors connected in series produce __________ capacitance compared to capacitors connected in parallel.

45% Answer Correctly

less

no

more

the same


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors connected in series produce less capacitance than capacitors connected in parallel.


3

If an electrical circuit is interrupted, which of the following will result?

61% Answer Correctly

parallel circuit

closed circuit

open circuit

short circuit


Solution

A closed circuit is a complete loop or path that electricity follows. It consists of a source of voltage, a load, and connective conductors. If the circuit is interrupted, if a wire is disconnected or cut for example, it becomes an open circuit and no electricity will flow.


4

In household electrical wiring, which color of insulation indicates the 'hot' wire?

50% Answer Correctly

black

red

green

white


Solution

In the NM cable used for wiring homes, each cable has three wires inside a sheath with each wire covered in a different color of insulation to indicate its type. The wire with the black insulation is the 'hot' wire, white is the neutral wire, and the ground wire is either covered in green insulation or left bare.


5 How would you connect 8 [12V 25A] batteries to achieve a combined power output of 48V 100A?
66% Answer Correctly
orthogonal
perpendicular
series
series-parallel

Solution

Connecting the 8 batteries in series multiplies their voltage while keeping their current the same yielding a 96V 25A configuration. Connecting the 8 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 12V 200A configuration. Using a series-parallel connection, 4 batteries can be connected in series and 4 can be connected in parallel resulting in a 48V 100A configuration.