| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.11 |
| Score | 0% | 62% |
| series-parallel | |
| parallel | |
| orthogonal | |
| series |
Connecting the 4 batteries in series multiplies their voltage while keeping their current the same yielding a 36V 15A configuration. Connecting the 4 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 9V 60A configuration. Using a series-parallel connection, 2 batteries can be connected in series and 2 can be connected in parallel resulting in a 18V 30A configuration.
Capacitors store:
resistance |
|
capacitance |
|
current |
|
electricity |
Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.
In an electrical circuit, resistors have fixed or __________ resistance.
parallel |
|
dynamic |
|
series |
|
variable |
Resistors are used to limit voltage and/or current in a circuit and can have a fixed or variable resistance. Variable resistors (often called potentiometers or rheostats) are used when dynamic control over the voltage/current in a circuit is needed, for example, in a light dimmer or volume control.
This circuit component symbol represents a(n):
resistor |
|
potentiometer |
|
capacitor |
|
inductor |
Resistors are used to limit voltage and/or current in a circuit and can have a fixed or variable resistance. Variable resistors (often called potentiometers or rheostats) are used when dynamic control over the voltage/current in a circuit is needed, for example, in a light dimmer or volume control.
In household electrical wiring, which color of insulation indicates the 'hot' wire?
green |
|
red |
|
black |
|
white |
In the NM cable used for wiring homes, each cable has three wires inside a sheath with each wire covered in a different color of insulation to indicate its type. The wire with the black insulation is the 'hot' wire, white is the neutral wire, and the ground wire is either covered in green insulation or left bare.