ASVAB Electronics Information Practice Test 115968 Results

Your Results Global Average
Questions 5 5
Correct 0 3.38
Score 0% 68%

Review

1

In metals, increasing the temperature typically _____________ conductivity.

50% Answer Correctly

does nothing to

eliminates

increases

decreases


Solution

All conductors have resistance and the amount of resistance varies with the element. Metals exhibit increased resistance (and, therefore, lower conductivity) as their temperature increases.


2 Use Ohm's Law to calculate the value of current in this circuit if voltage is 30 volts and resistance is 30 Ω.
81% Answer Correctly
0.33 A
0.5 A
1 A
1.1 A

Solution

Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.

Solved for current, I = \( \frac{V}{R} \) = \( \frac{30}{30} \) = 1 A


3

Capacitors store:

68% Answer Correctly

capacitance

current

electricity

resistance


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.


4 Use Ohm's Law to calculate the value of resistance in this circuit if voltage is 600 volts and current is 6 amps.
80% Answer Correctly
102 Ω
50 Ω
110 Ω
100 Ω

Solution

Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.

Solved for resistance, R = \( \frac{V}{I} \) = \( \frac{600}{6} \) = 100 Ω


5

A transformer utilizes an inductor to increase or decrease what in a circuit?

61% Answer Correctly

load

voltage

resistance

current


Solution

A transformer utilizes an inductor to increase or decrease the voltage in a circuit. AC flowing in a coil wrapped around an iron core magnetizes the core causing it to produce a magnetic field. This magnetic field generates a voltage in a nearby coil of wire and, depending on the number of turns in the wire of the primary (source) and secondary coils and their proximity, voltage is induced in the secondary coil.