ASVAB Electronics Information Practice Test 123654 Results

Your Results Global Average
Questions 5 5
Correct 0 3.47
Score 0% 69%

Review

1

An engineer who wants to document an electric circuit would create which of the following?

67% Answer Correctly

a blueprint

a schematic

a matrix

a layout


Solution

A schematic is the proper name for a drawing of an electric or electronic circuit.


2

This circuit component symbol represents a(n):

60% Answer Correctly

transformer

resistor

capacitor

inductor


Solution

An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.


3

One of the lights on your Christmas tree burns out and this causes the rest of the lights connected to that strand to go dark. How are the lights in that strand connected?

73% Answer Correctly

series

series-parallel

perpendicular

parallel


Solution

Lights connected in series form a chain with each light connecting to adjacent lights via one wire. Therefore, if one of the lights burns out and breaks the series, none of the other lights will receive power and they'll go dark. Lights connected in parallel each connect to the positive and negative nodes of the power source and would not go dark if one of their neighbors burnt out.


4

Which of the following will increase the magnetic field produced by the electric current in a wire?

67% Answer Correctly

construct the wire from insulative material

wind the wire into a coil

construct the wire from conductive material

wrap the wire around a ceramic core


Solution

A moving electric current produces a magnetic field proportional to the amount of current flow. This magnetic field can be made stronger by winding the wire into a coil and further enhanced if done around an iron containing (ferrous) core.


5

The ampere is a unit of measurement for:

79% Answer Correctly

current

energy

inductance

power


Solution

Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.