| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.22 |
| Score | 0% | 64% |
The volt is a unit of measurement for:
voltage |
|
power |
|
current |
|
capacitance |
Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.
A __________ electric current produces a magnetic field proportional to the amount of current flow.
high voltage |
|
moving |
|
stationary |
|
low voltage |
A moving electric current produces a magnetic field proportional to the amount of current flow. This magnetic field can be made stronger by winding the wire into a coil and further enhanced if done around an iron containing (ferrous) core.
Which of the following statements about electrical resistance is true?
the more resistive the conductor is the slower electron flow will be |
|
the more resistive the conductor is the faster electron flow will be |
|
the less resistive the conductor is the slower electron flow will be |
|
electrically conductive materials have no resistive properties |
Resistance is opposition to the flow of current. As resistance increases, current decreases as resistance and current are inversely proportional.
Capacitors connected in series produce __________ capacitance compared to capacitors connected in parallel.
the same |
|
no |
|
more |
|
less |
Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors connected in series produce less capacitance than capacitors connected in parallel.
If an electrical circuit is interrupted, which of the following will result?
parallel circuit |
|
open circuit |
|
short circuit |
|
closed circuit |
A closed circuit is a complete loop or path that electricity follows. It consists of a source of voltage, a load, and connective conductors. If the circuit is interrupted, if a wire is disconnected or cut for example, it becomes an open circuit and no electricity will flow.