Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery.

A transistor works by allowing a small amount of current applied at the base to control general current flow from collector to emitter through the transistor.

A schematic is the proper name for a drawing of an electric or electronic circuit.

An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.

Connecting the 4 batteries in series multiplies their voltage while keeping their current the same yielding a 60V 15A configuration. Connecting the 4 batteries in parallel multiplies their current while keeping their voltage the same yielding a 15V 60A configuration. Using a series-parallel connection, 2 batteries can be connected in series and 2 can be connected in parallel resulting in a 30V 30A configuration.