ASVAB Electronics Information Practice Test 140104 Results

Your Results Global Average
Questions 5 5
Correct 0 3.00
Score 0% 60%

Review

1

An engineer who wants to document an electric circuit would create which of the following?

66% Answer Correctly

a layout

a matrix

a schematic

a blueprint


Solution

A schematic is the proper name for a drawing of an electric or electronic circuit.


2

What kind of diode allows current to flow in the opposite direction once a certain voltage threshold is reached?

50% Answer Correctly

zener diode

light emitting diode

standard diode

v-type diode


Solution

A diode allows current to pass easily in one direction and blocks current in the other direction. A zener diode is a diode which allows current to flow in one direction as normal and will also allow current flow in the reverse direction when the voltage is above a certain value. This value is called the breakdown voltage.


3

This circuit component symbol represents a(n):

55% Answer Correctly

inductor

potentiometer

fuse

transformer


Solution

Resistors are used to limit voltage and/or current in a circuit and can have a fixed or variable resistance.  Variable resistors (often called potentiometers or rheostats) are used when dynamic control over the voltage/current in a circuit is needed, for example, in a light dimmer or volume control.


4

What type of current flows in only one direction in a circuit?

82% Answer Correctly

parallel

alternating

series

direct


Solution

Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery.


5 Suppose you have 10 [6V 15A] batteries that you can connect together in series, in parallel, or in series-parallel. Which of the following voltage and ampere combinations cannot be attained using these 10 batteries?
46% Answer Correctly
60V 15A
30V 75A
120V 300A
6V 150A

Solution

Connecting the 10 batteries in series multiplies their voltage while keeping their current the same yielding a 60V 15A configuration. Connecting the 10 batteries in parallel multiplies their current while keeping their voltage the same yielding a 6V 150A configuration. Using a series-parallel connection, 5 batteries can be connected in series and 5 can be connected in parallel resulting in a 30V 75A configuration.