| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.04 |
| Score | 0% | 61% |
A transformer utilizes an inductor to increase or decrease what in a circuit?
voltage |
|
resistance |
|
current |
|
load |
A transformer utilizes an inductor to increase or decrease the voltage in a circuit. AC flowing in a coil wrapped around an iron core magnetizes the core causing it to produce a magnetic field. This magnetic field generates a voltage in a nearby coil of wire and, depending on the number of turns in the wire of the primary (source) and secondary coils and their proximity, voltage is induced in the secondary coil.
This circuit diagram represents a(n):
series circuit |
|
open circuit |
|
series-parallel circuit |
|
parallel circuit |
A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.
What is the potential difference in an electrical circuit a measure of?
the load at a specific location in the circuit |
|
the resistance at a specific location in the circuit |
|
the current at a specific location in the circuit |
|
the voltage at a specific location in the circuit |
Electrons flow from an area of high concentration to an area of low concentration. A high voltage indicates a high concentration of electrons that creates a greater potential for electron flow than a low voltage. When applied to a load, voltage creates electricity and potential difference is the measure of voltage at a specific location in an electrical circuit.
This circuit component symbol represents a(n):
potentiometer |
|
resistor |
|
capacitor |
|
inductor |
Resistors are used to limit voltage and/or current in a circuit and can have a fixed or variable resistance. Variable resistors (often called potentiometers or rheostats) are used when dynamic control over the voltage/current in a circuit is needed, for example, in a light dimmer or volume control.
Capacitors connected in series produce __________ capacitance compared to capacitors connected in parallel.
more |
|
less |
|
the same |
|
no |
Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors connected in series produce less capacitance than capacitors connected in parallel.