ASVAB Electronics Information Practice Test 159092 Results

Your Results Global Average
Questions 5 5
Correct 0 3.08
Score 0% 62%

Review

1

Resistance is opposition to which of the following?

70% Answer Correctly

conductance

current

voltage

impedance


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


2

Electricity cannot flow...

72% Answer Correctly

through a circuit under load

through an open circuit

through a closed circuit

through a circuit with resistance


Solution

An electrical circuit is a path through which electricity flows. This path contains one or more components that create a load (something that is using electricity) and that load acts as resistance to the passage of electricity through the circuit. Electricity can only flow through a circuit when the path is closed and cannot flow through an open circuit.


3

Resistance and current are __________ proportional.

68% Answer Correctly

inversely

exponentially

directly

not


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


4 Suppose you have 10 [9V 25A] batteries that you can connect together in series, in parallel, or in series-parallel. Which of the following voltage and ampere combinations cannot be attained using these 10 batteries?
46% Answer Correctly
90V 250A
45V 125A
9V 250A
90V 25A

Solution

Connecting the 10 batteries in series multiplies their voltage while keeping their current the same yielding a 90V 25A configuration. Connecting the 10 batteries in parallel multiplies their current while keeping their voltage the same yielding a 9V 250A configuration. Using a series-parallel connection, 5 batteries can be connected in series and 5 can be connected in parallel resulting in a 45V 125A configuration.


5 How would you connect 4 [15V 15A] batteries to achieve a combined power output of 15V 60A?
51% Answer Correctly
series
parallel
orthogonal
series-parallel

Solution

Connecting the 4 batteries in series multiplies their voltage while keeping their current the same yielding a 60V 15A configuration. Connecting the 4 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 15V 60A configuration. Using a series-parallel connection, 2 batteries can be connected in series and 2 can be connected in parallel resulting in a 30V 30A configuration.