ASVAB Electronics Information Practice Test 180323 Results

Your Results Global Average
Questions 5 5
Correct 0 3.54
Score 0% 71%

Review

1 A circuit with a 120-volt power supply is protected by a 25-amp circuit breaker. What is the largest number of watts loads on this circuit can safely use?
82% Answer Correctly
2997 W
4500 W
3000 W
3001 W

Solution
Wattage is current multiplied by voltage: W = IV. So, the maximum amount of power a 120-volt circuit with a 25A circuit breaker would allow is 120V x 25A = 3000 W.

2

Longer the electrical wires mean _______________ voltage drop.

73% Answer Correctly

greater

lesser

complete

diminishing


Solution

Electrical wires have a certain amount of resistance per foot. A longer wire means more resistance and a greater voltage drop.


3

What is the potential difference in an electrical circuit a measure of?

57% Answer Correctly

the voltage at a specific location in the circuit

the load at a specific location in the circuit

the current at a specific location in the circuit

the resistance at a specific location in the circuit


Solution

Electrons flow from an area of high concentration to an area of low concentration. A high voltage indicates a high concentration of electrons that creates a greater potential for electron flow than a low voltage. When applied to a load, voltage creates electricity and potential difference is the measure of voltage at a specific location in an electrical circuit.


4

Capacitors store:

68% Answer Correctly

current

capacitance

electricity

resistance


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.


5

Electricity cannot flow...

72% Answer Correctly

through a closed circuit

through a circuit with resistance

through an open circuit

through a circuit under load


Solution

An electrical circuit is a path through which electricity flows. This path contains one or more components that create a load (something that is using electricity) and that load acts as resistance to the passage of electricity through the circuit. Electricity can only flow through a circuit when the path is closed and cannot flow through an open circuit.