| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.12 |
| Score | 0% | 62% |
Which of the following is not a characteristic of direct current?
used to power your cell phone |
|
an example power source is a generator |
|
cannot easily travel distances without power loss |
|
electrons flow in only one consistent direction |
Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of DC is a battery. In contrast to the constant one-way flow of direct current, alternating current changes direction many times each second. Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances.
This circuit component symbol represents a(n):
transistor |
|
inductor |
|
diode |
|
capacitor |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.
Resistance is opposition to which of the following?
impedance |
|
voltage |
|
conductance |
|
current |
Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.
What is the primary difference between a rectifier and an inverter?
a rectifier strips out the AC portion of electricity while an inverter strips out the DC portion |
|
a rectifier strips out the DC portion of electricity while an inverter strips out the AC portion |
|
a rectifier converts a DC input to AC while an inverter converts an AC input to DC |
|
a rectifier converts an AC input to DC while an inverter converts a DC input to AC |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.
In a series circuit, which of the following is the same across all branches of the circuit?
current |
|
conductance |
|
resistance |
|
voltage |
A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.