ASVAB Electronics Information Practice Test 204940 Results

Your Results Global Average
Questions 5 5
Correct 0 3.55
Score 0% 71%

Review

1

Why does current in an electric circuit create heat?

77% Answer Correctly

voltage is naturally hot

the wire in the circuit burns when current passes through

heat is created when the current overcomes resistance in the wire

current is naturally hot


Solution

Current in an electric circuit creates heat when the current overcomes resistance in the wire.


2

One of the lights on your Christmas tree burns out and this causes the rest of the lights connected to that strand to go dark. How are the lights in that strand connected?

73% Answer Correctly

series

perpendicular

series-parallel

parallel


Solution

Lights connected in series form a chain with each light connecting to adjacent lights via one wire. Therefore, if one of the lights burns out and breaks the series, none of the other lights will receive power and they'll go dark. Lights connected in parallel each connect to the positive and negative nodes of the power source and would not go dark if one of their neighbors burnt out.


3

This circuit diagram represents a(n):

65% Answer Correctly

series-parallel circuit

rectifier

series circuit

parallel circuit


Solution

In a parallel circuit, each load occupies a separate parallel path in the circuit and the input voltage is fully applied to each path. Unlike a series circuit where current (I) is the same at all points in the circuit, in a parallel circuit, voltage (V) is the same across each parallel branch of the circuit but current differs in each branch depending on the load (resistance) present.


4 A circuit with a 120-volt power supply is protected by a 20-amp circuit breaker. What is the largest number of watts loads on this circuit can safely use?
82% Answer Correctly
2160 W
2393 W
2400 W
4800 W

Solution
Wattage is current multiplied by voltage: W = IV. So, the maximum amount of power a 120-volt circuit with a 20A circuit breaker would allow is 120V x 20A = 2400 W.

5

This circuit component symbol represents a(n):

57% Answer Correctly

AC source

transformer

DC source

capacitor


Solution

Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery.