ASVAB Electronics Information Practice Test 210067 Results

Your Results Global Average
Questions 5 5
Correct 0 3.40
Score 0% 68%

Review

1

The joule is a unit of measurement for:

67% Answer Correctly

energy

capacitance

power

resistance


Solution

The joule is a unit of measurement for energy.


2

The watt is a unit of measurement for:

78% Answer Correctly

power

energy

frequency

resistance


Solution

Electrical power is measured in watts (W) and is calculated by multiplying the voltage (V) applied to a circuit by the resulting current (I) that flows in the circuit: P = IV. In addition to measuring production capacity, power also measures the rate of energy consumption and many loads are rated for their consumption capacity. For example, a 60W lightbulb utilizes 60W of energy to produce the equivalent of 60W of heat and light energy.


3 How would you connect 8 [15V 20A] batteries to achieve a combined power output of 60V 80A?
66% Answer Correctly
series-parallel
series
parallel
orthogonal

Solution

Connecting the 8 batteries in series multiplies their voltage while keeping their current the same yielding a 120V 20A configuration. Connecting the 8 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 15V 160A configuration. Using a series-parallel connection, 4 batteries can be connected in series and 4 can be connected in parallel resulting in a 60V 80A configuration.


4

The farad is a unit of measurement for:

63% Answer Correctly

capacitance

power

inductance

energy


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.


5

This circuit component symbol represents a(n):

65% Answer Correctly

DC source

transistor

transformer

AC source


Solution

In contrast to the constant one-way flow of direct current, alternating current changes direction many times each second. Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances.