ASVAB Electronics Information Practice Test 222862 Results

Your Results Global Average
Questions 5 5
Correct 0 3.59
Score 0% 72%

Review

1

A diode to an electronic circuit is like a _______________ to a city?

67% Answer Correctly

highway

traffic light

one-way street

parking lot


Solution

A diode allows current to pass easily in one direction and blocks current in the other direction.


2

The formula specifying Ohm's law is which of the following?

76% Answer Correctly

\(V = {R \over I}\)

V = I2R

\(V = {I \over R}\)

V = IR


Solution

Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.


3

Which of the following is the preferred method for splicing wires?

56% Answer Correctly

wire crimps

screw-on connectors

soldering

wrap in small gauge wire


Solution

Splicing is permanently joining two wires together. Splicing can be done with screw-on connectors or wire crimps but the preferred method for splicing is soldering. Soldering takes the most effort but results in a connection that is electrically and mechanically identical to the original wire.


4

Which of the following is the formula for calculating electrical power?

73% Answer Correctly

\(P = {V \over I}\)

\(P = {I \over V}\)

P = I2V

P = IV


Solution

Electrical power is measured in watts (W) and is calculated by multiplying the voltage (V) applied to a circuit by the resulting current (I) that flows in the circuit: P = IV. In addition to measuring production capacity, power also measures the rate of energy consumption and many loads are rated for their consumption capacity. For example, a 60W lightbulb utilizes 60W of energy to produce the equivalent of 60W of heat and light energy.


5 What's the overall power consumption of a piece of equipment that is rated for 8 amps at 80 volts?
80% Answer Correctly
639 W
213 W
641.5 W
640 W

Solution
Power is measured in watts (W) and 1 watt equals 1 ampere multiplied by 1 volt: P = \( V \times I \). For this problem, the equipment is rated for 8 amps (I) at 80 volts (V) so the equation becomes P = \( 80 \times 8 \) = 640 W