ASVAB Electronics Information Practice Test 230214 Results

Your Results Global Average
Questions 5 5
Correct 0 3.13
Score 0% 63%

Review

1

The rate of flow of electrons per unit time is which of the following?

74% Answer Correctly

resistance

current

voltage

conductance


Solution

Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.


2

Which of the following will increase the magnetic field produced by the electric current in a wire?

67% Answer Correctly

wrap the wire around a ceramic core

construct the wire from insulative material

wind the wire into a coil

construct the wire from conductive material


Solution

A moving electric current produces a magnetic field proportional to the amount of current flow. This magnetic field can be made stronger by winding the wire into a coil and further enhanced if done around an iron containing (ferrous) core.


3 How would you connect 8 [9V 20A] batteries to achieve a combined power output of 72V 20A?
53% Answer Correctly
perpendicular
series
orthogonal
parallel

Solution

Connecting the 8 batteries in series multiplies their voltage while keeping their current the same yielding a 72V 20A configuration. Connecting the 8 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 9V 160A configuration. Using a series-parallel connection, 4 batteries can be connected in series and 4 can be connected in parallel resulting in a 36V 80A configuration.


4

An engineer who wants to document an electric circuit would create which of the following?

67% Answer Correctly

a blueprint

a matrix

a schematic

a layout


Solution

A schematic is the proper name for a drawing of an electric or electronic circuit.


5

The diameter of a number 12 wire is __________ the diameter of a number 6 wire?

51% Answer Correctly

double

less than

more than

triple


Solution

The larger the number the smaller the diameter of the wire. So, the diameter of a number 12 wire is less than the diameter of a number 6 wire.