ASVAB Electronics Information Practice Test 235289 Results

Your Results Global Average
Questions 5 5
Correct 0 3.02
Score 0% 60%

Review

1

Which of the following converts electrical energy into another form of energy in an electrical circuit?

61% Answer Correctly

load

AC source

DC source

wiring


Solution

A load is a source of resistance that converts electrical energy into another form of energy. The components of a microwave, for example, are loads that work together to convert household electricity into radation that can be used to quickly cook food.


2

This circuit component symbol represents a(n):

65% Answer Correctly

fuse

potentiometer

diode

capacitor


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.


3

The diameter of a number 12 wire is __________ the diameter of a number 6 wire?

52% Answer Correctly

less than

triple

double

more than


Solution

The larger the number the smaller the diameter of the wire. So, the diameter of a number 12 wire is less than the diameter of a number 6 wire.


4

This circuit component symbol represents a(n):

72% Answer Correctly

resistor

potentiometer

capacitor

inductor


Solution

Resistors are used to limit voltage and/or current in a circuit and can have a fixed or variable resistance.  Variable resistors (often called potentiometers or rheostats) are used when dynamic control over the voltage/current in a circuit is needed, for example, in a light dimmer or volume control.


5 How would you connect 10 [15V 5A] batteries to achieve a combined power output of 150V 5A?
53% Answer Correctly
orthogonal
series-parallel
series
perpendicular

Solution

Connecting the 10 batteries in series multiplies their voltage while keeping their current the same yielding a 150V 5A configuration. Connecting the 10 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 15V 50A configuration. Using a series-parallel connection, 5 batteries can be connected in series and 5 can be connected in parallel resulting in a 75V 25A configuration.