| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.29 |
| Score | 0% | 66% |
Which of the following is not an advantage of semiconductors over conductors?
a semiconductor exhibits increased conductivity with increased temperatures |
|
materials to produce semiconductors are cheap and abundant |
|
a semiconductor conducts current better than a conductor |
|
a semiconductor's conductivity can be varied under an external electrical field |
A semiconductor is a material that has a limited ability to conduct electrical current with conductivity between that of an insulator and that of a conductor. Silicon, a cheap and abundant material, is the most used semiconductor material although other materials are used in the electronics components made from semiconductors. The primary advantages of a semiconductor over a conductor is that the conductivity of a semiconductor can be varied under an external electrical field giving engineers precise control over complex circuits and, unlike conductors like metals, a semiconductor's conductivity increases with increased temperatures.
Capacitors store:
resistance |
|
capacitance |
|
current |
|
electricity |
Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.
Capacitors are charged by what type of current?
high voltage |
|
low voltage |
|
direct |
|
alternating |
Capacitors store voltage and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.
| 56 W | |
| 120 W | |
| 60 W | |
| 61.5 W |
Which of the following is the preferred method for splicing wires?
screw-on connectors |
|
wrap in small gauge wire |
|
soldering |
|
wire crimps |
Splicing is permanently joining two wires together. Splicing can be done with screw-on connectors or wire crimps but the preferred method for splicing is soldering. Soldering takes the most effort but results in a connection that is electrically and mechanically identical to the original wire.