| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.73 |
| Score | 0% | 75% |
You would measure the amount of resistance at a certain point in a circuit with a(n):
voltmeter |
|
ammeter |
|
ohmmeter |
|
potentiometer |
Resistance is opposition to the flow of current and is measured in ohms (Ω). An ohmmeter is used to measure the amount of resistance at a certain point in a circuit.
The rate of flow of electrons per unit time is which of the following?
resistance |
|
conductance |
|
voltage |
|
current |
Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.
The watt is a unit of measurement for:
power |
|
energy |
|
frequency |
|
resistance |
Electrical power is measured in watts (W) and is calculated by multiplying the voltage (V) applied to a circuit by the resulting current (I) that flows in the circuit: P = IV. In addition to measuring production capacity, power also measures the rate of energy consumption and many loads are rated for their consumption capacity. For example, a 60W lightbulb utilizes 60W of energy to produce the equivalent of 60W of heat and light energy.
Current is the rate of flow of electrons per unit time and is measured in:
amperes |
|
ohms |
|
volts |
|
coulombs |
Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.
One of the lights on your Christmas tree burns out and this causes the rest of the lights connected to that strand to go dark. How are the lights in that strand connected?
series-parallel |
|
series |
|
perpendicular |
|
parallel |
Lights connected in series form a chain with each light connecting to adjacent lights via one wire. Therefore, if one of the lights burns out and breaks the series, none of the other lights will receive power and they'll go dark. Lights connected in parallel each connect to the positive and negative nodes of the power source and would not go dark if one of their neighbors burnt out.