| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.15 |
| Score | 0% | 63% |
The farad is a unit of measurement for:
capacitance |
|
energy |
|
inductance |
|
power |
Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.
Which of the following statements about a capacitor is false?
you should always discharge any capacitors before working on an electronic circuit |
|
a capacitor remains charged even after the input voltage is removed |
|
to discharge a capacitor safely, use a high-wattage resistor comparable to the capacitance of the capacitor |
|
it is safe to touch a capacitor with your hands as long as it is small |
The purpose of a capacitor is to retain electric charge and it will do so even after its input voltage is removed. After the input voltage is removed, the capacitor will slowly discharge but, depending on the size and characteristics of the capacitor, discharging could take from a few minutes to a few years. So, it's never safe to touch a capacitor with your hands and you should make sure to discharge any capacitors in a circuit before working on it using an appropriately high-wattage resistor or a capacitor discharge tool.
General current flow in a transistor is from __________ to __________.
collector, base |
|
collector, emitter |
|
base, collector |
|
base, emitter |
The transistor is the foundation of modern electronic devices. It is made entirely from semiconductor material (making it a solid state device) and can serve many different functions in a circuit including acting as a switch, amplifier, or current regulator. A transistor works by allowing a small amount of current applied at the base to control general current flow from collector to emitter through the transistor.
Which of the following allows DC to pass easily but resists the flow of AC?
inductor |
|
capacitor |
|
semiconductor |
|
transformer |
An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.
This circuit diagram represents a(n):
parallel circuit |
|
open circuit |
|
series circuit |
|
series-parallel circuit |
A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.