ASVAB Electronics Information Practice Test 26694 Results

Your Results Global Average
Questions 5 5
Correct 0 3.47
Score 0% 69%

Review

1

The volt is a unit of measurement for:

79% Answer Correctly

capacitance

power

current

voltage


Solution

Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.


2

Which of the following is not an advantage of semiconductors over conductors?

49% Answer Correctly

materials to produce semiconductors are cheap and abundant

a semiconductor's conductivity can be varied under an external electrical field

a semiconductor conducts current better than a conductor

a semiconductor exhibits increased conductivity with increased temperatures


Solution

A semiconductor is a material that has a limited ability to conduct electrical current with conductivity between that of an insulator and that of a conductor. Silicon, a cheap and abundant material, is the most used semiconductor material although other materials are used in the electronics components made from semiconductors. The primary advantages of a semiconductor over a conductor is that the conductivity of a semiconductor can be varied under an external electrical field giving engineers precise control over complex circuits and, unlike conductors like metals, a semiconductor's conductivity increases with increased temperatures.


3

Which of the following statements about electrical resistance is true?

74% Answer Correctly

the more resistive the conductor is the slower electron flow will be

electrically conductive materials have no resistive properties

the less resistive the conductor is the slower electron flow will be

the more resistive the conductor is the faster electron flow will be


Solution

Resistance is opposition to the flow of current. As resistance increases, current decreases as resistance and current are inversely proportional.


4 What's the overall power consumption of a piece of equipment that is rated for 6 amps at 50 volts?
80% Answer Correctly
330 W
301.5 W
450 W
300 W

Solution
Power is measured in watts (W) and 1 watt equals 1 ampere multiplied by 1 volt: P = \( V \times I \). For this problem, the equipment is rated for 6 amps (I) at 50 volts (V) so the equation becomes P = \( 50 \times 6 \) = 300 W

5

Which of the following is the preferred method for splicing wires?

56% Answer Correctly

wire crimps

soldering

screw-on connectors

wrap in small gauge wire


Solution

Splicing is permanently joining two wires together. Splicing can be done with screw-on connectors or wire crimps but the preferred method for splicing is soldering. Soldering takes the most effort but results in a connection that is electrically and mechanically identical to the original wire.