ASVAB Electronics Information Practice Test 296495 Results

Your Results Global Average
Questions 5 5
Correct 0 3.66
Score 0% 73%

Review

1

You would measure the amount of voltage between two points in a circuit with a(n):

82% Answer Correctly

voltmeter

reostat

battery

ammeter


Solution

Voltage (V) is the electrical potential difference between two points. A voltmeter is used to measure the voltage between two points in a circuit.


2

Resistance and current are __________ proportional.

68% Answer Correctly

exponentially

directly

not

inversely


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


3

Why does current in an electric circuit create heat?

77% Answer Correctly

the wire in the circuit burns when current passes through

heat is created when the current overcomes resistance in the wire

current is naturally hot

voltage is naturally hot


Solution

Current in an electric circuit creates heat when the current overcomes resistance in the wire.


4

What is the frequency of most household electrical systems?

59% Answer Correctly

110V

60Hz

60MHz

110Hz


Solution

Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances. Most households use electricity with a frequency of 60Hz.


5 Use Ohm's Law to calculate the value of current in this circuit if voltage is 360 volts and resistance is 90 Ω.
80% Answer Correctly
4 A
2 A
3.6 A
12 A

Solution

Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.

Solved for current, I = \( \frac{V}{R} \) = \( \frac{360}{90} \) = 4 A